SDI-104 Operator's Manual
Version 2008

[Search Manual] [Table of Contents] [FAQ] [Go to Previous] [Go to Next]


Appendix A

SDI Technical Specifications

Embedded Computer System

  • CPU
1 GHz Celeron
  • RAM
1 G Byte
  • Disk
80 G Byte UDMA (minimum)
  • I/O
PS2 keyboard, HD15S video – rear panel
USB2 – front panel – for software upgrades
  • Network
100 M bps or 1 G bps using a standard RJ45 connector – rear panel
  • Ingestor Board
SSEC designed with PC104+ interface
  • Feature
Boots from CompactFlash, OS runs from RAM

 

Power

  • Input Voltage
100 to 240 VAC , 50-60 Hz
  • Power
< 60 W
  • Connector
IEC-320-C14 – rear panel
  • Circuit breaker
1.5A – rear panel

Note: Unit comes with 7.5 foot power cord which mates to the input power connector and comes with a NEMA 5-15P connector on the other end.

 

Operating Environment

  • Temperature
40-90 ° F
  • Humidity
20-80% RH non condensing

 

Enclosure

  • Type
19 inch rack mount
  • Height
2 RU (3.5 inches)
  • Depth
15 inches
  • Cooling
internal fan

 

Signal Specifications

  • Inputs
Clock, Data;
Data sampled on the falling edge of Clock
  • Input Connector
BNC female or D15P – rear panel
  • Input Configuration
Single ended (TTL) or RS422 (differential)
  • Input Termination
50 , 75 or 120 ohm
  • Input Data Rate
10 Kbps – 40 Mbps
  • Data Types
NRZ-L, NRZ-S, NRZ-M set by jumper

 

External Indicators

  • Power
red LED – front panel
  • Status
green LED – front panel

[Search Manual] [Table of Contents] [FAQ] [Go to Previous] [Go to Next]