SDI POES Software Changes
This page lists the software changes included with each SDI POES version
available on the McIDAS Website. Each version contains all changes
in the previous versions.
Modules Updated in October 2009 Server Binary Updates
Module |
Inquiry Number |
Change |
bin/poesadir
bin/poesaget |
14603
|
Added coefficient for non-linear radiance correction
term for NOAA-19. |
Modules Updated in August 2009 Server Binary Updates
Module |
Inquiry Number |
Change |
bin/poesadir
bin/poesaget |
14457
|
Updated POES servers to accommodate NOAA-19 satellite. |
Modules Updated in Version 2005jun01
Module |
Inquiry Number |
Change |
mcinet.sh |
12477 |
Fix for paths to servers.
Closed ports 500 and 503.
(Note: Beginning with this 2005jun01 version, the
SDI installation opens only port 112 (ports 500 and 503 are no longer opened).
Therefore, 2005jun01 SDI GVAR servers will respond only to data requests
from clients running McIDAS-X version 2005 or 2004 (and also 2003 if the
client’s MCCOMPRESS environment
variable is set to "gzip"). Thus, commands sent to server port 500 or 503
from clients running older versions will fail on the client (eventually
timeout because of no response). See the McIDAS-X
Version 2005 Upgrade Procedure for more information.) |
bin/mcserv,
bin/poesadir,
bin/poesaget |
12608 |
Updated selective dataset restrictions. |
bin/poesadir,
bin/poesaget |
12642 |
Added support for NOAA-18. |
Modules Updated in Version 2004jun03
Module |
Inquiry Number |
Change |
bin/* |
12476 |
Updated support for McIDAS port 112. |
bin/mcserv |
none |
Updated to enable selective dataset restrictions. |
Modules Updated in Version 2003jun04
Module |
Inquiry Number |
Change |
~mcadde/mcidas/bin/adirserv, ~mcadde/mcidas/bin/agetserv |
none |
Updated for HIRS radiance output, the new calibration for NOAA-17, and the final GOES-12 calibration. |
~mcadde/mcidas/bin/mcserv, ~mcadde/mcidas/bin/gzip, ~mcadde/mcidas/bin/mcinet.sh |
11100 |
Added support for new McIDAS port 112 and gzip. |
Modules Updated in Version 2003feb04
Module |
Inquiry Number |
Change |
bin/poesadir
bin/poesaget |
11971 |
Corrected error in NOAA-17 AVHRR calibration. |
Modules Updated in Version 2003jan10
Module |
Inquiry Number |
Change |
opt/tip/bin/l1b |
11772 |
Added support for NOAA-17 and updated NOAA-15 HIRS coefficients. |
opt/tip/bin/hirs |
11772 |
Added support for NOAA-17, updated data statements because the channels used in the regression equations changed, and updated hirs3_limb_cor.f to use single precision to double precision for input and output temperature arrays. |
opt/tip/bin/amsua
opt/tip/bin/amsub |
11772 |
Added support for NOAA-17. |
opt/tip/n17_amsua_template
opt/tip/n17_amsub_template
opt/tip/n17_hirs3_template
opt/tip/amsua_lc.n17
opt/tip/amsub_lc.n17
opt/tip/hirs3_lc.n17
opt/tip/noaa17_11_tip.cfg |
11772 |
Added support for NOAA-17. |
opt/admin/bin/update_poes |
11772 |
Added support for NOAA-17. |
opt/tip/hirs3_lc.n15
opt/tip/hirs3_lc.n16 |
11772 |
Updated limb correction for NOAA-15 and NOAA-16 HIRS, respectively. |
bin/adirserv
bin/agetserv |
11772 |
Updated for HIRS radiance output and new calibration for NOAA-17. |
opt/tip/bin/klm_tip |
11967 |
Changed way that the oldest Level 1b files are deleted. |
Modules Updated in Version 2002aug29
Module |
Inquiry Number |
Change |
bin/gvaradir
bin/gvaraget |
11733 |
Modified to accommodate any valid date format. |
bin/poesadir
bin/poesaget |
11772 |
Added support for NOAA-17 AVHRR data. |
Modules Updated in Version 2001jul20
Module |
Inquiry Number |
Change |
opt/tip/bin/l1b |
none |
Updated to fix pixel navigation error and solar zenith angle error in NOAA-16. |
opt/tip/n15_amsua_template
opt/tip/n15_amsub_template
opt/tip/n15_hirs3_template |
none |
Updated with latest values from NESDIS. |
bin/poesaget |
11197 |
Updated for PRT calibration fix for NOAA-15 AVHRR. |
opt/fy1c/bin/ingcntl
opt/fy1c/bin/inge |
none |
New ingestor control script (ingcntl) and ingestor binary (inge) for FY-1C. |
bin/agetserv
bin/adirserv |
none |
Updated for FY-1C support and added GOES Sounder tracking. |
opt/poes/bin/inge |
none |
Updated ingestor binary to handle NOAA POES conflicts, adjust time correctly and fix navigation. |
opt/gvar/bin/inge |
none |
Modified to add satellite ID to the end of the mail message. |
opt/tip/bin/l1b |
none |
Updated to fix negative values and problems when crossing 00 UTC. |
opt/tip/bin/klm_tip
opt/tip/bin/make_tip |
none |
Added check to see if starting AREA number was less than designated start. |
bin/gvaraget
bin/gvaradir |
11329 |
Updated for GOES-M/12. |
Modules Updated in Version 2001jan26
Module |
Inquiry Number |
Change |
opt/tip/bin/hirs
opt/tip/bin/amsua
opt/tip/bin/amsub |
10737 |
Updated for NOAA-16 and to allow use of NAVDISP. Module amsua was also updated to handle limb corrections. |
opt/tip/bin/l1b |
none |
Updated for NOAA-16. |
opt/tip/n15_amsub_template |
none |
Updated to use new RFI correction coefficients. |
opt/poes/bin/inge |
10879 |
Changed the method for number lines in the index files. Also fixed problem where GAC recorded images play back erroneous data. |
bin/gvaraget
bin/gvaradir |
10965 |
Updated to fix GVAR IMC off navigation error on little endian machines and to sync with McIDAS-X Fastrack version 7.704. |
bin/gvarnavf |
10965 |
Updated to fix GVAR IMC off navigation error on little endian machines. |
install.sh |
none |
Modified to write server and ingestor version in ~mcadde/mcidas/bin and remind POES users to run /opt/admin/bin/update_poes. |
opt/tip/bin/make_tip |
none |
Modified to start numbering AREAs if less than range. |
opt/tip/bin/klm_tip |
none |
Modified to work if RCP environment variable is unset. |
opt/admin/bin/update_poes |
none |
Modified to make tip directory and update NOAA-16 configuration and calibration files. |
opt/tip/n16*
opt/tip/*.n16 |
none |
Added calibration and header files for NOAA-16. |
opt/tip/amsua_lc.n15 |
none |
New limb coefficient file. |
opt/poes/bin/poesaget
opt/poes/bin/poesadir |
10994 |
Updated for NOAA-16. |
Modules Updated in Version 2000jun06
Module |
Inquiry Number |
Change |
~mcadde/mcidas/bin/adirserv
~mcadde/mcidas/bin/agetserv |
10522 |
Modified to allow ADDE logging by setting a flag in .mcenv. |
opt/nport/bin/inge |
10644, 10641, 10738 |
Fixed 23:45 gini file naming, changed the event file name to notify.list from notify.lst, and included additional binary characters on text stream to route products correctly. |
opt/gms/bin/inge |
10710 |
Updated to fix leap year problem. |
opt/tip/bin/amsua
opt/tip/bin/amsub
opt/tip/bin/hirs |
none |
Added programs to convert AMSU-A, AMSU-B and HIRS/3 level 1b files to AREAs. |
opt/tip/bin/l1b |
none |
Added program to decommutate level 1b from raw POES. |
opt/tip/bin/klm_tip |
none |
Added script which is started via SDI mail event to decommutate NOAA-15 tip data. |
opt/tip/n15_amsua_template
opt/tip/n15_amsub_template
opt/tip/n15_hirs3_template |
none |
New AMSU-A, AMSU-B and HIRS/3 header files. |
opt/tip/amsua_lc.n15
opt/tip/amsub_lc.n15
opt/tip/hirs3_lc.n15 |
none |
New coefficient files for NOAA-15 support. |
opt/tip/noaa12_9_tip.cfg
opt/tip/noaa14_5_tip.cfg
opt/tip/noaa15_7_tip.cfg |
none |
New configuration files. |
opt/admin/bin/update_poes |
none |
Script to install NOAA-15 tip changes. |
opt/gvar/bin/inge |
none |
Added support for priority interrupt operations on GOES-11. |
~mcadde/mcidas/bin/gvaradir
~mcadde/mcidas/bin/gvaraget |
10740 |
Added new calibration coefficients for GOES-11. |
opt/pdus/bin/delxsect.ksh |
none |
Modified to check if file is to be RCP'd (affects SSEC only). |
Modules Updated in Version 2000jan12
Module |
Inquiry Number |
Change |
~mcadde/mcidas/bin/poesadir |
10602, 10604 |
Fixed for Y2K navigation and access problem. |
~mcadde/mcidas/bin/poesaget |
10602, 10604 |
Fixed for Y2K navigation and access problem. |
opt/tip/bin/tip_dec |
10602 |
Fixed for Y2K navigation. |
opt/gms/bin/inge |
10499 |
Corrected 3 line navigation error. |
opt/tip/tip1.7 |
none |
Removed (unneccessary). |
opt/tip/tip1.7.tar |
none |
Removed (unneccessary). |
opt/tip/tip1.7.ksh |
none |
Removed (unneccessary). |
|