// Example configuration file for E-AERI Agilent system
// note : this file is parsed line by line, a comment line must begin with // (double slash),
//        a // in middle of a line DO NOT represent a comment

// This config file must have 3 parts to be a valid Agilent config file :
// -->L4411A
// -->L4421A
// -->L4452A
// The line IMMEDIATLY after a change of section MUST be the VISA address of the instrument


-->L4411A
TCPIP0::169.254.44.11::inst0::INSTR

// Configuration lines for L4411A module
// module L4411A can contain subsections,
// Each subsection must begins with a line that begins with *-->L4411A-
// For Each subsection of the L4411A instrument should correspond
// a subsection of the L4421A instrument

*-->L4411A-1 (Resistance 2W)
CONF:RES AUTO, DEF
TRIG:SOUR EXT
TRIG:COUNt 21
//RES:NPLC 0.001
TRIG:DElay 0.1

*-->L4411A-2 (Resistance 4W) ABB1
CONF:FRES AUTO   
FRES:RANG:AUTO ONCE
RES:NPLC 1
TRIG:SOUR EXT
TRIG:COUNt 1
TRIG:DElay 3

*-->L4411A-3 (Resistance 4W) ABB2
CONF:FRES AUTO
FRES:RANG:AUTO ONCE
RES:NPLC 1
TRIG:SOUR EXT
TRIG:COUNt 2
TRIG:DElay 3

*-->L4411A-4 (Resistance 4W) HBB
CONF:FRES AUTO
FRES:RANG:AUTO ONCE
RES:NPLC 1
TRIG:SOUR EXT
TRIG:COUNt 3
TRIG:DElay 3

*-->L4411A-5 (Volt DC)
CONF:VOLT:DC AUTO, DEF
TRIG:SOUR EXT
TRIG:COUNt 1
VOLT:NPLC 10
TRIG:DElay 0.01

*-->L4411A-6 (Volt DC)
CONF:VOLT:DC AUTO, DEF
TRIG:SOUR EXT
TRIG:COUNt 5
//VOLT:NPLC 0.001
TRIG:DElay 0.1

*-->L4411A-7 (Diode)
CONF:DIODe
TRIG:SOUR EXT
TRIG:COUNt 1

-->L4421A
TCPIP0::169.254.44.21::inst0::INSTR

// Configuration lines for L4421A module
// module L4421A can contain subsections,
// Each subsection must begins with a line that begins with *-->L4421A-
// For Each subsection of the L4421A instrument should correspond
// a subsection of the L4411A instrument
// For Each subsection of the L4421A instrument should correspond
// the list of corresponding HK variable separated by comma
// (valid list of variables at the end of this file)

*-->L4421A-1 (Resistance 2W)
ROUT:SCAN (@1007,1008,1009,1010,1011,1012,1013,1014,1015,1016,1017,1018,1019,1020,1027,1028,1029,1030,1031,1039,1040)
ROUT:CHAN:ADV:SOUR EXT
HK:refRes1, refRes2, refRes3, outsideAirRes, interferometerAirRes, blackbodySupportStructureRes, blackbodyAirRes, mirrorMotorRes, sceneMirrorRes, powerSupplyRes24V, powerSupplyRes28V, stirlingCoolerCompressorRes, stirlingCoolerExpenderRes, thermalEnclosureRes, inputMirrorMotorDriveElectronicRes, dataAcquisitionModulesRes, sceneWindowRes, fanAirflowRes, protectiveEnclosureRes, externalSunDetectorSensor, internalSunDetectorSensor

*-->L4421A-2 (Resistance 4W)
ROUT:CHAN:FWIR ON,(@1001)   
ROUT:SCAN (@1001)
ROUT:CHAN:ADV:SOUR EXT
ROUT:CLOS (@1001,1021, 1911, 1922)
HK:ambientBlackbodyTopRimRes

*-->L4421A-3 (Resistance 4W)
ROUT:CHAN:FWIR ON,(@1002, 1003)
ROUT:SCAN (@1002, 1003)
ROUT:CHAN:ADV:SOUR EXT
ROUT:CLOS (@1003,1023, 1911, 1922)
HK:ambientBlackbodyApexRes, ambientBlackbodyBottomRimRes

*-->L4421A-4 (Resistance 4W)
ROUT:CHAN:FWIR ON,(@1004, 1005, 1006)
ROUT:SCAN (@1004, 1005, 1006)
ROUT:CHAN:ADV:SOUR EXT
ROUT:CLOS (@1006,1026, 1911, 1922)
HK:hotBlackbodyTopRimRes, hotBlackbodyApexRes, hotBlackbodyBottomRimRes

*-->L4421A-5 (Volt DC)
ROUT:SCAN (@1033)
ROUT:CHAN:ADV:SOUR EXT
HK:stirlingCoolerCurrent

*-->L4421A-6 (Volt DC)
ROUT:SCAN (@1034,1035,1036,1037,1038)
ROUT:CHAN:ADV:SOUR EXT
HK:atmosphericRelativeHumidity, interferometerRelativeHumidity, atmosphericPressureSensor, externalRainDetectorSensor, internalRainDetectorSensor

*-->L4421A-7 (Diode)
ROUT:SCAN (@1032)
ROUT:CHAN:ADV:SOUR EXT
HK:detectorTemperatureSensor


-->L4452A
TCPIP0::169.254.44.52::inst0::INSTR

// Configuration lines for L4452A module

Configure:Digital:State input,(@1001)
Configure:Digital:State input,(@1002)
Configure:Digital:State output,(@1003)
Configure:Digital:State output,(@1004)
Source:Digital:Data:Byte 3,(@1003)
Source:Digital:Data:Byte 0,(@1004)
Source:VOLT:LEV 0.894,(@1006) 
Source:VOLT:LEV 4.986,(@1007) 

// List of valid variable for L4421A instrument

// ambientBlackbodyTopRimRes
// ambientBlackbodyApexRes
// ambientBlackbodyBottomRimRes
// hotBlackbodyTopRimRes
// hotBlackbodyApexRes
// hotBlackbodyBottomRimRes
// refRes1
// refRes2
// refRes3
// outsideAirRes
// interferometerAirRes
// blackbodySupportStructureRes
// blackbodyAirRes
// mirrorMotorRes
// sceneMirrorRes
// powerSupplyRes24V
// powerSupplyRes28V
// stirlingCoolerCompressorRes
// stirlingCoolerExpenderRes
// thermalEnclosureRes
// inputMirrorMotorDriveElectronicRes
// dataAcquisitionModulesRes
// sceneWindowRes
// fanAirflowRes
// protectiveEnclosureRes
// detectorTemperatureSensor
// stirlingCoolerCurrent
// atmosphericRelativeHumidity
// interferometerRelativeHumidity
// atmosphericPressureSensor
// externalRainDetectorSensor
// internalRainDetectorSensor
// externalSunDetectorSensor
// internalSunDetectorSensor


//End of Agilent configuration file